3/4", 1", 1 1/2", 2"
This was a reduced pressure assembly. It was produced from 1968 to 1973. The assembly was redesigned and changed to the 835B. It was a bronze bodied unit. The check covers were screwed into the body. The checks were an in-line design similar to the 805. All springs are contained when the covers are removed. Spring tension had to be released for proper repair. Check seats are not replaceable. The relief valve seat is replaceable. The 835 design has the relief valve mounted on the first check cover with a special bushing. The relief valve was able to be detached from the check body and was connected by an external relief valve sensing line.
Common repair parts are a very small subset of the 10,000 plus items BAVCO stocks.
Please feel free to contact us direct at 800-458-3492 for pricing on items not listed
or backflow prevention devices.